This section is a general overview of our RF & Microwave products as module or for use in a 19 inch standard rack. The focus is on products operating in the L-, S-, C-, X-, Ku-Band for applications as Satellite Communication, Radar systems (weather, defense, civil), transmitters / receivers, WIMAX etc.
For questions about the RF & Microwave Products or request for a quotation click on the image and fill out the 'Request a Quote Form'.
Overview RF & Microwave Products: |
The Down Converters are designed for use in 19 inch standard rack, covering the L-, S-, C-, X-, Ku-Band. Control of the Down Converters can be both local on the front panel or by TCP/IP. At the front panel are LED’s to indicate the control and monitoring. The Output is protected with an isolator for open en short. |
The Up Converters are designed for use in 19 inch standard rack, covering the L-, S-, C-, X-, Ku-Band. Control of the Up Converters can be both local on the front panel or by TCP/IP. At the front panel are LED’s to indicate the control and monitoring. Output is protected with an isolator for open en short. High stability, low ripple and excellent Phase Noise. |
The Multi Couplers are designed for use in 19 inch standard rack, covering the L-, S-, C-, X-, Ku-Band. Control of the Multi Couplers can be both local on the front panel or by TCP/IP. At the front panel are LED’s to indicate the control and monitoring. Up to 1 Watt of no damage input power protection. |
FCD-Tech offers a range of different types RF Amplifiers. In this section are the most our common Amplifiers: LNA, SSPA, Broadband Power Amplifier, Dual Channel Amplifier. If special requirements are needed we are able to arrange customer designed Amplifiers. Contact our staff for any requirements. |
The Active Combiner/Splitter is available for several frequency ranges: L-Band, S-Band, C-Band, X-Band and Ku-Band. Standard is the C-Band from 3.4-4.2GHz. Both the Splitter and Combiner can be supplied as a 2, 4 or 8 way type with N connectors (SMA connector is optional). Input power protection up to 1 Watt. The overall gain across the band is >15dB. |
The Dual PLL Synthesizer Oscillator frequency ranges are respectively 2200 MHz to 2570 MHz (LO1) and 5800 MHz to 6800 MHz (LO2) with output levels of > +12 dBm. Both oscillators have a low Phase Noise level. The internal clock reference will automatically switch over in presence of an external reference. The unit has a compact shape with SMA connectors and communicates using I2C. |
The input frequency range of the DLVA is 2 GHz - 6 GHz with build-in amplifiers with gain of 33 dB and 7 dB. Separate RF and BIT input and input response from 100 ns to CW. The unit has a compact shape and uses SMA connectors and a standard 9 pin D type connector for DC and control signal. |
The High Power Limiter operates over a frequency range of 0.1 to 5.0 GHz. Maximum power handling is 2 kW (depends on both pulse-width and duty-cycle. Standard SMA connectors for input and output and optional a PIN version is available. The high power limiter has a compact shape and 4 mounting holes. |
The output frequency range of the PLDRO is 6 GHz to 14 GHz with output power of +13 dBm. Reference frequency is 5 MHz to 100 MHz (optional higher reference frequency is possible). The PLDRO has an Ultra-Low Phase Noise level. Alarm level for TTL in-lock : high is lock or low is lock. The module is small size 57 x 57 x 23 mm with low power consumption. Tested for 100% burn-in and environmentally. |
This IF Switch Matrix is available in 19 inch wide and 2U high rack mountable systems. It has 4 inputs and 4 outputs. Wide band output from 70 MHz +/- 30 MHz. Up to 1 Watt of no damage input power protection. It is easily controlled and monitored remotely, using TCP/IP interface and has capability of allocating a unique IP address. The system could be easily controlled with standard software programs such as Labview, Labwindows, C, C++ etc. |